SMP11 MELTING POINT APPARATUS STUART
Made in United Kingdom
Melting Point Apparatus, Analogue, SMP11
Easy to operate – ideal for educational use Supplied with safe spirit filled thermometer
With new safety features and easy to use, the SMP11 is ideal for use in education.
Supplied with a safe, spirit filled mercury free thermometer, the low toxic blue spirit will not pose a health hazard in the event of a breakage. Easy to follow instructions are printed directly on to the apparatus and are available in most European languages.
With a manually adjustable heating rate, the SMP11 will rapidly heat samples up to 20C per minute to the melt temperature and up to the maximum temperature of 250 C. Accurate readings to within 1′ C of the melt temperature can be achieved by using a slower heating rate of between 1 and 10′ C per minute.
Up to three samples can be viewed and tested at any one time. Samples are illuminated by a bright white LED and viewed via a magnifying lens. The magnifying lens can be detached for cleaning using the simple to follow instructions printed on to the instrument.
No. of samples Up to 3
Temperature range Ambient to 250′ C
Heating rate 1 to 10 C/ min
Dimensions ( w x d x h) 370 x 140 x 110 mm
Net weight 1.7kg
Electrical supply 230V, 50Hz, 50W
Melting point tubes
Made from soda glass, these tubes are easy to seal in a Bunsen flame and break into two. Supplied in robust tube holder, pack of 100 tubes. Tube overall length is 100mm Tube diameter = 1.9mm, inner diameter = 1.3mm and wall thickness = 0.3mm.
SMP11 Melting point Apparatus, complete with thermometer and pack of 100 melting point tubes ( open both ends)
SMP11/ 1 Spare thermometer, spirit filled, 0′ C to 250′ C
SMP1/ 2 Cooling plug ( brass) for rapidly reducing heating block temperature after use
SMP1/ 4 Glass melting point tubes, open at both ends, pack of 100
SMP2/ 1 Glass melting point tubes, closed at both ends, pack of 100
SMP10/ 1 Glass melting point tubes, closed at one end, pack of 100